Characteristics:
Simple processing, fast hardening and incredible strength. TURBOBOND Powerglue can be used in combination with TURBOBOND Filler, TURBOBOND Activator Plus and TURBOBOND Primer Plus. The best bonding results are achieved at room temperature. The hardening times may vary depending on the type of material, from a few seconds to several minutes. Maximum strength has been reached after approx. 5 hours.
Application:
The surface of the materials to be bonded should be dry, free of rust, dust and grease.
For previously glued parts, the old adhesive should be removed using TURBOBOND Solvent Debonder.
The TURBOBOND Powerglue is to be applied thinly on one side only.
Do not brush on.
Without pressure a correction is possible for a moment.
By way of contact pressure (oxygen withdrawal) the hardening process is started.
Leave the bonded parts rested and unmoved for a few minutes.
Some materials have a different hardening time.
Warning reference:
Keep out of reach of children.
Only use in well ventilated areas.
Do not swallow.
Avoid inhaling vapours.
Keep away from skin and eyes.
Liability:
We decline all responsibility for any damage (including that to third parties) resulting from improper use or application of Turbobond industrial adhesive or any other Turbobond products.
Opening:
When opening tubes or bottles, hold away from your face.
Storage:
Keep tube or bottle tip clean, to guarantee further adhesive processes.
Keep bottle closed after use.
After use keep vertically in a refrigerator or in a dark and cool place.
On adhesive products, which where stored correctly, we give a one year quality assurance.
Size:
Available in a 4g Tube or 10g, 20g, 50g bottles.
For larger sizes, please contact us.
1. NEEDLE NOZZLE
clog proof needle cap prevents nozzle clogging
safety proof nozzle first time functioning only possible after distance ring is broken off
2. HARD TUBE APPLICATOR
adhesive flow control “suck back” effect helps correct dosing due to a special alloyed aluminium
drip proof stops dripping and spilling, minimises waste
3. SUPER GLUE
super fast bonding no long fixture time
very high bond strength reliable repairs
superb allround properties Household, Hobby, Auto, Model, Shoe repair etc.
bonds Plastics, Rubber, Metal, China, Ceramic, Wood, Leather, Cork, Cardboard etc. within seconds
without special treatment will not bond PE, PP, PTFE (TeflonR), PS (Styrofoam), Silicon, Glass
4. Instructions on how to use the POWERDROP APPLICATOR
turn and take off the complete Needle Cap
break off the distance ring
replace the Needle Cap by turning the cap onto the tube without the distance ring
the membrane of the Hard Tube Applicator will open automatically
turn and take off the top part of the Needle Cap
apply adhesive by gently squeezing the Hard Tube Applicator
a major advantage of the Hard Tube Applicator when doing this, is that a slight “suck
back” effect is achieved which gives precise control of the adhesive flow
close Hard Tube Applicator by guiding the yellow needle into nozzle
turn the Top on tightly the complete unit is reliably closed and resealed again.